Back to Top

Victoria Trafka, President Of EQS, Has A New Article Published Discussing The Benefits Of Protoyping Rapidly In ODT Magazine

 

Engineering & Quality Solutions, Inc's president and principal engineer, Victoria Trafka, authored a new article for Orthopedic & Design Technology magazine.  The article is titled "Intelligent Iteration: The Benefits of Prototyping Rapidly" and discusses the benefits and reasons for utilizing quick prototypes during all phases of product design for medical devices.

 

https://www.odtmag.com/issues/2021-03-01/view_columns/intelligent-iteration-the-benefits-of-prototyping-rapidly/?widget=listSection

  661 Hits

Reporting of Device Mechanical Testing for FDA Submissions

If you're performing mechanical or performance testing on your devices, you may want to review this new FDA guidance to make sure that expected information is included in test reports and protocols intended for submissions. Presenting testing in the proper format will make the submission process faster and smoother.

See the link below for the guidance titled "Recommended Content and Format of Non-Clinical Bench Performance Testing Information in Premarket Submissions":

https://www.fda.gov/regulatory-information/search-fda-guidance-documents/recommended-content-and-format-non-clinical-bench-performance-testing-information-premarket

 

  658 Hits

EQS Presented at ASTM Workshop on Medical Device Standards Utilizing Computational Modeling

I was pleased to be one several expert presenters at the ASTM Workshop on Medical Device Standards Utilizing Computational Modeling. I discussed a case study of Finite Element Analysis (FEA) of an orthopedic plate. This workshop was sponsored by ASTM Committee F04 on Medical and Surgical Materials and Devices and was meant to “bring together thought leaders in the medical device modeling and standardization communities” for education and advancing the use of computational modeling. The agenda had several very interesting presentations and provided a wide range of information relevant to orthopedic and spinal development today. See the link below to view the agenda.

https://www.astm.org/MEETINGS/SYMPOSIAPROGRAMS/F04ID3804.pdf

  675 Hits

Developing a Spinal Plate Now or In the Near Future?

Developing a Spinal Plate Now or In the Near Future? If so, you may want to download the latest draft guidance from the FDA titled "Spinal Plating Systems – Performance Criteria for Safety and Performance Based Pathway". See link below. They've released this as a DRAFT only at this time in order to gain industry comments. But it shows that the FDA is definitely heading towards a performance pathway that does not require obtaining and testing predicate devices. This will be a major improvement and will likely speed up development and 510(k) submissions, since performance and safety targets will be known and easily available. I think these changes will be particularly helpful to small and startup companies.
 
If you need professional and experienced engineering for your spinal project, contact Engineering & Quality Solutions, Inc. today!

  640 Hits

New FDA Guidance for Medical Device 510(k) Submissions

On Sept. 13 the FDA released FOUR new final guidance documents relating to 510(k) submissions - guidelines for traditional, abbreviated, special 510(k). They appear to be really harmonizing and solidifying the overall expectations for these submissions. As the names imply, these are not draft guidance documents, so expect that they will be enforced soon. Check out the official documents at the link below:

  639 Hits

Design History File (DHF) Remediation is Becoming More Common in Medical Device Companies

Design History File (DHF) Remediation

FDA inspectors, ISO auditors and internal quality and regulatory personnel are scrutinizing design history files more than ever, and the consultants at Engineering & Quality Solutions, Inc. have seen this first-hand while assisting clients with QMS audits and FDA inspections. DHF deficiencies are a major source of 483 letters in the medical device industry, and we’ve helped many clients remediate their DHFs and update procedures to ensure future design control compliance.

DHF deficiencies may be related to products which have been on the market a long time and the documentation practices from many years ago just aren’t sufficient today. In new development projects some personnel or comapnies simply don’t have the expertise, capacity or procedures in place to fully comply with regulations. If a company has identified DHF deficiencies, they may be dedicating resources to remediating DHFs for existing products, reviewing current in-process development efforts more carefully, and revamping design controls procedures to make sure design files are compliant. The internal effect of the DHF remediation effort is a slowing of new development as resources attend to legacy products, improve their documentation and answer corrective actions.

It may seem somewhat painful to go through, but the ultimate effect of strong DHFs (and also the intended effect of the regulations) is a better product with fewer problems. Applying proper design controls helps ensure that the product does what is intended, is safer, is more reliable and predictable, has fewer problems, and meets market needs.

If you need expert help to get your DHFs remediated quickly and efficiently, and to free up internal resources, call us today!

  579 Hits

Orthopedic Design and Technology Mag Article: "Designing Complexity Simply"

I really enjoyed contributing to this ODT article on the latest tends and technology in orthopedic product development.  It's great that ODT magazine researches and talks with industry professionals like myself to find out what's happening and get a preview on the orthopedic products that may be under development and launched soon.  I appreciated the opportunity to give my experience and perspective.  Check out the full article at this link:

https://www.odtmag.com/issues/2019-08-14/view_features/designing-complexity-simply/

  628 Hits

FDA Presentation on Design Controls for Medical Devices

Design Controls for Medical Devices:
Check out this presentation on Design Controls, published by the FDA. They've been publishing educational presentations and videos on many relevant topics for years; this can act as a primer on the subject, help resolve questions or confusion, and the best part is that it comes from the source!
 
If your team needs expert help with design controls - creating, maintaining or remediating design history files, contact the experts at Engineering & Quality Solutions, Inc. today.

  618 Hits

Part 4 – Transitioning to Internal Resources

Engineering & Quality Solutions, Inc. is the perfect resource for medical device start-ups and business ventures. Contact us today to get started.

Part 4 – Transitioning to Internal Resources

This is the final installment in a four-part series on how Engineering & Quality Solutions, Inc. can help business ventures and start-ups by consulting on product development, quality systems, manufacturing and transitioning to internal resources if needed. We consult on-site or remotely and can work in a small or large capacity, as company inside resources or outside consultants, whatever works for your company model and stage. Many start-ups operate entirely in the cloud with resources living in different states, and this is a great model to reduce overhead and attract the best personnel. As the company and business evolves and grows, we adapt and provide the resources you need at the exact time you need them!

When business grows and matures, start-ups may decide to remain remote and cloud-based or to transition to a central office. The consultants at Engineering & Quality Solutions, Inc. have worked with all sizes and stages of medical device companies and we understand how businesses function at different stages. We can help streamline transitions by managing growth phases, training new employees, and continuing to support your company as needed.

We can help with:

  • Transitioning from External to Internal Resources
  • Training New Employees
  • Continued Support for Product Development, Quality System and Manufacturing as needed

  585 Hits

Part 3 - Manufacturing Management for Start-ups

Engineering & Quality Solutions, Inc. is the perfect resource for medical device start-ups and business ventures. Contact us today to get started.

Part 3 – Manufacturing

This is the third installment in a four-part series on how Engineering & Quality Solutions, Inc. can help business ventures and start-ups by consulting on product development, quality systems, manufacturing and transitioning to internal resources if needed. We consult on-site or remotely and can work in a small or large capacity, as company inside resources or outside consultants, whatever works for your company model and stage. Many start-ups operate entirely in the cloud with resources living in different states, and this is a great model to reduce overhead and attract the best personnel. As the company and business evolves and grows, we adapt and provide the resources you need at the exact time you need them!

Once the device is designed, product manufacturing needs to be addressed. Many medical device start-ups need help finding manufacturing resources and ensuring they’re qualified to work on medical products. The consultants at Engineering & Quality Solutions, Inc. have worked in medical device manufacturing and quality assurance and we have a network of qualified resources. We’ve toured, evaluated and audited many contract manufacturers, so we can efficiently identify and qualify vendors for your new products. We can act as your resource to manage all aspects of contract manufacturing.

We can help with:

  • Identifying and Qualifying Suppliers
  • Maintaining Supplier Documentation
  • Supplier and Incoming Product Inspection
  • Quotes and Proposals
  • Manufacturing Technical Problem Solving
  • Purchasing Controls
  • Supplier Quality Audits
  • Acting as Manufacturing & Supply Chain Manager

  618 Hits

Part 2 – Quality System Development for Start-ups

Engineering & Quality Solutions, Inc. is the perfect resource for medical device start-ups and business ventures. Contact us today to get started.

Part 2 – Quality System Development

This is the second installment in a four-part series on how Engineering & Quality Solutions, Inc. can help business ventures and start-ups by consulting on product development, quality systems, manufacturing and transitioning to internal resources if needed. We consult on-site or remotely and can work in a small or large capacity, as company inside resources or outside consultants, whatever works for your company model and stage. Many start-ups operate entirely in the cloud with resources living in different states, and this is a great model to reduce overhead and attract the best personnel. As the company and business evolves and grows, we adapt and provide the resources you need at the exact time you need them!

Once a medical device start-up has completed the concept and is conducting final product development, it’s time to start implementing a quality system. This will help ensure activities are completed in compliance with FDA 21 CFR 820 and the company is poised to move to manufacturing and distribution as soon as possible. The consultants at Engineering & Quality Solutions, Inc. have developed, implemented, and streamlined dozens of quality management systems for start-ups. We know the regulations and we have worked in the trenches ourselves, so we can implement a system which is compliant and functional without being cumbersome. We’ve also been through many FDA inspections and helped companies recover from FDA warning letters.

We can help with:

  • Developing a Complete Quality System
  • Updating, Finishing or Streamlining an Existing Quality System
  • Conducting Internal Audits
  • Maintaining QMS Records
  • Acting as Quality Manager
  • Preparation and Representation for FDA Inspections

  545 Hits

Part 1 – Product Development for Start-ups

Part 1 – Product Development

Engineering & Quality Solutions, Inc. is the perfect resource for medical device start-ups and business ventures. Contact us today to get started.

This is the first installment in a four-part series on how Engineering & Quality Solutions, Inc. can help business ventures and start-ups by consulting on product development, quality systems, manufacturing and transitioning to internal resources if needed. We consult on-site or remotely and can work in a small or large capacity, as company inside resources or outside consultants, whatever works for your company model and stage. Many start-ups operate entirely in the cloud with resources living in different states, and this is a great model to reduce overhead and attract the best personnel. As the company and business evolves and grows, we adapt and provide the resources you need at the exact time you need them!

New business ventures and start-up companies need concepts and products developed quickly and efficiently, which means experienced engineers with the right tools are a must. The consultants at Engineering & Quality Solutions, Inc. have decades of medical device development experience and have the software, instruments and resources to produce concepts and designs in very short timeframes. We can source prototypes and make design modifications in just days, keeping your projects on track.

Most medical devices need an accompanying design history file with appropriate design controls. Our engineers know the FDA regulations and can create the necessary design files for you. Therefore, your product will be designed and the documentation will be compliant with FDA 21 CFR 820.

Continue reading
  549 Hits

Tips for a successful business relationship with a consultant

Thinking of hiring a consultant for a short or specialized project? Here are a few tips to make the relationship a success.

Consultants allow clients to complete specialized tasks and gain extra capacity easily without hiring a full-time person. A good consultant is professional, reliable, honest and efficient but the client-consultant relationship still needs to be a good fit for both sides. The truth is, it’s best to use the same screening and evaluation process for a consultant as you would for an employee.  Here are four key tips to success when working with a consultant.

Interview

Always interview a consultant as you would a prospective employee. Consultants are not employees, but they ultimately work for you!  Therefore it’s best to conduct a thorough interview and find out about their technical qualifications, work experience and communications style.

Get References

Continue reading
  552 Hits

FDA Announces Potential Overhaul to Medical Device Review Process

The FDA announced it intended to overhaul the new medical device review process with the intent to improve device safety. See the AP article at the link below for more details.

The review system, which includes the 510(k) submission and is the pathway used to clear most devices, has been in place for decades and may well need an overhaul in some capacity. The article states that the process needs improvement to keep up with technological advancements in devices. True, technology has made major advancements since the substantial equivalence pathway was adopted in 1976, but not all devices have had such rapid technological advancements. Compare a cannulated bone screw to a diabetes glucose meter and that point is clear. It may make sense to apply stricter criteria to a complex device such as one including software and electronics versus an orthopedic device where the basic technology hasn’t changed much since the original device was cleared.

It will be interesting to see how this overhaul moves forward. Typically, it has taken a long time for the FDA to make changes to practices on a much smaller scale. And this overhaul may involve congress and a long list of government and civilian officials. I certainly hope that if this moves forward, they group devices based on technology or application or complexity for different pathways, rather than making the clearance pathways more strict for all devices. The industry absolutely needs to be dedicated to providing safer devices, but that also has to be balanced with getting those safe devices to market in a reasonable time.

https://www.apnews.com/58820e1d2cff448181073d05eb56c1a6

 

  531 Hits

Finite Element Analysis, FEA, Computational Modeling, Computer Simulation…what is it and how can you use it to improve medical device product development?

All of these terms refer to the creation and use of computer models to analyze performance of a design. For orthopedic medical devices, these methods could help in predicting failure loads and locations, comparing performance of several design options, determining mechanical performance ranges within a product family, comparing performance of one device to a competitive (predicate) device, and more. Several examples of these applications are shown below.

ASTM/ISO Mechanical Testing

Any orthopedic device submitted for FDA 510(k) must undergo some kind of mechanical testing, usually according to an applicable ASTM or ISO test standard. FEA can be used to simulate the tests and get a preview of performance and results, before time and money has been spent on prototypes and lab testing. The simulation can also be applied to a competitor’s design as a preview of mechanical equivalence testing, or even used in lieu of mechanical testing when test specimens are limited or unavailable.

Design Family Analysis

Many medical devices contain various sizes in a product family, but it’s impractical to prototype, evaluate and test every variation. FEA can be used to quickly analyze the whole family to determine the range of performance, and which versions should be used for physical testing.

Continue reading
  505 Hits

Design Verification and Validation

Design verification and validation is a critical part of every medical device design project, and is required by the FDA and by ISO 13485:2016. By completing design verification, you confirm that design inputs were indeed met in the final design. And by completing design validation, you ensure that the final design meets user needs and intended uses. Planning, carrying out and documenting design verification and validation can be a cumbersome task but it doesn’t have to be. The engineers at Engineering & Quality Solutions, Inc. have extensive experience in completing design V&V for a variety of medical products. We can help your product development team with V&V from A to Z, whatever level your needs; you can hand off the project to EQS for full V&V planning, documentation and completion; or EQS can carry out some aspects of the V&V tasks as needed. Contact us today to discuss your design verification and validation needs.

  500 Hits

Need to complete internal audits on time and with useful feedback?

Many small to mid-sized companies have issues completing their internal audits or getting real insight from their audits.  Since employees are responsible for many different areas, there may be few options for unbiased internal auditors.  Or employees may not be qualified to perform thorough audits to ISO 13485 and FDA 21 CFR 820 standards.  If your company falls into either of these categories, Engineering & Quality Solutions, Inc. can help.  We can complete your internal auditing and give you real, useful feedback.  We understand the latest regulations and standards and how to apply them efficiently.  Contact us today to discuss your internal audits.

  504 Hits

Managing & Maintaining Medical Device Design History Files (DHFs) and Design Controls

Many medical device companies find themselves uncertain of how to meet FDA design control regulations, and overwhelmed with the associated DHF workload. Lean start-ups are focused on product innovation and launch, and therefore have few resources to dedicate to DHF documentation. Established companies have legacy product DHFs that were created years ago and are in need of an update. Many companies are faced with audit findings and corrective actions related to insufficient DHF procedures and files, and they don’t know where to begin the improvement process. No matter what the scenario is, EQS can help get your DHFs and procedures in order.

EQS can ease your DHF burden by:

  • Creating DHFs for new products
  • Reviewing & updating existing DHF documents to meet current regulations
  • Updating & expanding DHF documents for line extensions
  • Updating QMS procedures to streamline DHF processes and meet regulations
  • Training employees on understanding DHF documentation and regulations FDA 21 CFR 820.30

Contact us today to discuss your project!

Our goal is to help you meet yours.

  505 Hits

Article on Design Challenges in the Orthopedic Industry

Check out the recent story in ODT magazine, titled "Back to the Drawing Board: Designing Orthopedic Devices".  EQS was pleased to provide our inside perspective on orthopedic and spine design, and hear what others in the industry are experiencing.  It's a dynamic time in orthopedic R&D right now and this article sheds some light on some of the issues and solutions.

http://www.odtmag.com/issues/2017-10-01/view_features/back-to-the-drawing-board-designing-orthopedic-devices/

 

  529 Hits

Orthopedic Design & Technology Article on R&D

It was my pleasure to contribute, along with other industry professionals, to the latest ODT article looking at the state of R&D in the orthopedic industry. Some topics discussed are: development trends, challenges and FDA regulations in orthopedic devices. See the full article here:

http://www.odtmag.com/issues/2017-03-01/view_features/out-of-ideas/

 

  490 Hits